2.4.4. Equipment of the luggage compartment
Appearance of the luggage compartment is shown on an illustration.
|
|
Luggage offices of the car |
First-aid kit and sign of an emergency stop
The regular first-aid kit is equipped in the left ware box of a door of a back of the car, - the folding cover of a box is marked with the pictogram with the image of a white cross on a blue background. Periodically check completeness of contents of the first-aid kit.
The sign of an emergency stop is located in the right ware box of a door of a back of the car, - the folding cover of a box is marked with the pictogram with the image of an exclamation mark.
|
|
Location of ware boxes under storage of the first-aid kit (1) and a sign of an emergency stop (2) |
Spare wheel, jack and the compressor for pumping of tires
The description of regular places of storage of a spare wheel, jack (with a balloon key) and the compressor for a rating of tires is provided in Introduction to the present manual.
Safety grid
In case of need the safety grid can be tense behind front seats, or behind a back many-placed seat, - cast away decorative covers of fasteners down, hang a grid.
|
|
Details of installation of the upper edge of a safety grid 1 — the Top elements of fastening of a grid are equipped with folding protective covers |
Having hung a grid on the top fasteners, hook on hooks of the lower fixing belts for special anchor brackets on the car floor panel, then pull belts by means of coupling locks.
|
|
Details of fastening of bottom edge of a safety grid (at installation behind front seats – the coupling lock of a belt is closed by a grid) 2 — the Hook of a fixing belt |
|
|
Details of fastening of bottom edge of a safety grid (at installation behind a back many-placed seat) 2 — the Hook of a fixing belt |
Reliability of a tension of a grid should be checked later short time, - in case of need tighten fixing belts.
|
|
Transportation of passengers on the seats located behind the tense grid is not allowed! |
Removal of a grid is made upside-down. The regular place for storage of the twisted safety grid is provided behind a many-placed back seat.
Horizontal blind
|
|
Installation of a back horizontal blind is represented possible only at the removed folding seats of the additional third row (see the Section Adjustment of Seats). |
The casing of a horizontal blind is mounted in a raspor in a forward part of the luggage compartment, - after introduction of a casing to reception deepenings it is necessary to wring out the button of an otpuskaniye of a clamp and to take away outside the mobile fastener. Further the blind is extended through a back groove of a casing and fixed in special holders near a back doorway.
For removal of a blind release it from back holders, and, holding for a loop, wind in a casing. Further, shift inside to a zashchelkivaniye the mobile fastener and release assembly of a blind from reception deepenings in panels of a side upholstery in a forward part of the luggage compartment
|
|
Details installation of a back horizontal blind 1 — Back holders |
Floor covers
On the car floor panel under assembly of a many-placed back seat removable covers are provided. Before removal of covers it is necessary to dismantle folding seats of the additional third row (see the Section Adjustment of Seats).
Put a back of a many-placed seat and cast away a floor cover forward, - the otpuskaniye of clamps of covers occurs automatically.
Uncovered develop in half and are located in pockets on backs of folding back seats of the additional third row.
|
|
Before retracting in pockets of backs of folding seats of the third additional row uncovered half of the luggage compartment develop in half |
|
|
Retracting the put cover in a pocket of a back of a folding back seat 2 — a pocket Fastener (like Velkro), - to undo |
For installation of a cover into place it is necessary to pass a hand throughout a special service opening and to fill the directing pins in reception nests, - the button of an otpuskaniye of clamps has to be latched.
Elements for fixing of freight
Special brackets on the floor panel, - two behind assemblies of front seats and four directly in the luggage compartment.
|
|
Bracket for fixing of freight |
Options of fastening of freight at various placement are given in illustrations.
|
|
Options of placement of freight |
|
|
Options of fastening of the transported freight |
Four more fasteners for fixing of easy freight are provided on walls of the luggage compartment.
|
|
Hooks for fixing of easy freight |