12.4.5. Check and adjustment of convergence
Check and adjustment of convergence of forward wheels
Check and adjustment of convergence of forward wheels
|
|
- The corresponding illustrative material is presented naillyustration to which all references which are found in the text belong.
- Establish forward wheels in rectilinear situation and record a steering wheel by means of special adaptation.
|
|
Fixing of a steering wheel during the checking and adjustment of convergence of forward wheels |
- Make sure of correctness of centering of the steering drive, - in the neutral provision of a lath an adjusting groove of hinged knot it has to be combined from valvate assembly of entrance knot of rack transfer (shooter), risky on the case. In case of need correct the provision of a steering wheel, having displaced its maximum on 1 tooth.
- For adjustment of convergence release lock-nuts (10f) and correct as appropriate the provision of tips of steering drafts (10), - track that boots were not overwound.
|
|
Back wheels
Check and adjustment of convergence of back wheels
Check and adjustment of convergence of back wheels
|
|
- The corresponding illustrative material is presented on сопр. illustrations to which all references which are found in the text belong.
- Check correctness of adjustment of road gleams of axes (see the Section Check and adjustment of height of road gleams), in case of need make the corresponding adjustments.
- Adjustment is made by means of eccentric bolts (60a) on support of fastening of longitudinal extensions (60) to a stretcher (50) of a back suspension bracket.
|
|
