12.3. Steering


Activation of the steering pump filled with air is inadmissible by no means!

  1. Illustrative material according to procedures of filling and pumping of the pump GUR is presented on an illustration to which all references which are found in the text belong.

    Removal of a cover from the steering pump

  2. Uncover and fill the tank of the steering pump (30a) to level about 10 mm below the upper edge, - in case of need take aside an air sleeve (47).
  3. For 2-3 minutes start the engine and several times turn a steering wheel from an emphasis against the stop, - air from a hydraulic path of the steering amplifier has to be removed automatically.
  4. Check liquid level in the GUR tank, in case of need make the corresponding adjustment (see the Head of the Power supply system and production of the fulfilled gases).
  5. Make sure of lack of signs of development of leak of hydraulic liquid of system of hydrostrengthening of a wheel.
  6. Establish into place a cover if shifted, - return into place an air sleeve (47)