12.3.7. Removal and installation of tips of steering draft
|
|
In total самоконтрящиеся bolts and nuts are subject to replacement without fail! |
External tip
Details of installation of an external tip of steering draft
|
|
- Details of installation of an external tip of steering draft are shown on an illustration to which all references which are found in the text belong.
- By means of a suitable stripper release the hinge of a tip of steering draft (10a) from a rotary fist.
- Having recorded a tip not movably (shooter), release a lock-nut (10i), the nut is subject to replacement without fail.
- Previously having marked its adjusting situation, remove a tip (10).
- Installation is made upside-down, - track correctness of combination of the tags put in the course of dismantle.
|
|
Internal tip
Removal/installation of an internal tip of steering draft
|
|
Left draft
Left draft
Right draft |
|
|
- The corresponding illustrative material is presented on illustrations to which all references which are found in the text belong.
- Remove an external tip (see above).
|
|
At service of the right draft remove also left boot. |
- Holding a lath not movably Rozhkov the key on 24 mm which is put on special lysk by means of Rozhkova of a nozzle on 36 or 38 mm (012) turn out the hinge of an internal tip (12a/12b), - it is not necessary to use extenders to the handle of a key or to use a sledge hammer.
- Installation is made upside-down.
|
|
