12.3.10. Dismantling of the mechanical regulator of a steering column
Design of the mechanical regulator of provision of a steering column
|
|
|
|
71 — the Shirt |
93h — Pruzhina |
|
PERFORMANCE ORDER |
|
|
- 1. Introduction
- 2. Governing bodies and methods of safe operation
- 3. Current leaving and service
- 4. Engine
- 5. Cooling systems, heating and air conditioner
- 6. A power supply system and production of the fulfilled gases
- 7. Systems of electric equipment of the engine
- 8. Manual box of gear shifting
- 9. Automatic transmission
- 10. Transmission line
- 11. Brake and auxiliary systems
- 12. Suspension bracket and steering
- 12.1. Forward suspension bracket
- 12.2. Back suspension bracket
- 12.3. Steering
- 12.3.1. Filling and "pumping" of the steering pump
- 12.3.2. Check of a pressure of the steering pump
- 12.3.3. Replacement of a collar of fastening of a hose of a path of cooling of GUR liquid
- 12.3.4. Assessment of a condition of hinges of steering drafts and boots of a case of rack transfer
- 12.3.5. Removal and installation of the steering pump
- 12.3.6. Replacement of boots of a case of the steering mechanism
- 12.3.7. Removal and installation of tips of steering draft
- 12.3.8. Removal installation of entrance knot of the steering mechanism
- 12.3.9. Removal and installation of the steering mechanism
- 12.3.10. Dismantling of the mechanical regulator of a steering column
- 12.3.11. Removal and installation of a steering wheel and spiral contact drum of a steering column
- 12.3.12. Removal and installation of the cylinder of the lock of ignition
- 12.3.13. Removal and installation of the lock of blocking of a steering column
- 12.3.14. Removal and installation and shirts of a steering column
- 12.4. Suspension bracket geometry
- 13. Body
- 14. Onboard electric equipment
