14:11. Systems of additional safety (SRS)
Details of installation of the module of a driver's frontal safety cushion on release models till 31.08.01
Details of installation of the module of a driver's frontal safety cushion on release models from 01.09.01
|
|
- Details of installation of the module of a driver's frontal safety cushion are shown on illustrations to which all references which are found in the text belong.
- Disconnect a negative wire from the battery.
- Turn out fixing screws (2).
- Separate the module of a safety cushion (1) from a steering wheel.
- On release models from 01.09.01 release clamps (3) on contact sockets of an electrical wiring (4 and 5).
- Disunite the contact socket(s) of an electrical wiring (4/4 and 5) fuses of a gas generator.
- Finally remove the module of a safety cushion (1).
|
|
The module which is subject to utilization has to be previously discharged in the conditions of a workshop of car service! |
- Installation is made upside-down, - track reliability of a zashchelkivaniye of a latch(es) of the contact socket(s).
- Having finished installation, make sure of serviceability of operation of the returnable mechanism of the combined understeering switch, in conclusion make diagnostics of SRS with use of the special equipment (ask for the help specialists of car service).
|
|
Passenger safety cushion
Details of installation of the module of a passenger frontal safety cushion on release models till 31.08.01
Details of installation of the module of a passenger frontal safety cushion on release models till 31.08.01
|
|
- Details of installation of the module of a passenger frontal safety cushion are shown on illustrations to which all references which are found in the text belong.
- Disconnect a negative wire from the battery.
- Remove the dashboard (1) (see the Head Kuzov).
- On release models from 01.09.01 release clamps (3) on contact sockets of an electrical wiring (4 and 5).
- Disunite the contact socket(s) of an electrical wiring (4/4 and 5) fuses of a gas generator.
- Release самоконтрящиеся nuts (2) and remove the module of a passenger frontal safety cushion.
|
|
The module which is subject to utilization has to be previously discharged in the conditions of a workshop of car service! |
- Installation is made upside-down, - track reliability of a zashchelkivaniye of a latch(es) of the contact socket(s).
- In conclusion make diagnostics of SRS with use of the special equipment (ask for the help specialists of car service).
|
|
