Mercedes-Benz M-class W163 - Repair manual and operation

14.8.7. Removal and installation of assembly of understeering switches

Details of installation of assembly of understeering switches

Details of installation of assembly of understeering switches

PERFORMANCE ORDER

Details of installation of understeering switches are shown on illustrations to which all references which are found in the text belong. Disconnect a negative wire from the battery. Remove a steering wheel and a spiral contact drum of the horn/module of a driver's frontal safety cushion (see the Head Podvesk and steering). Turn out fixing screws (1) and remove the lower section (2) casings of a steering column. Remove the top section (3) casings of a column. Remove side finishing panels (12), - at the corresponding complete set disunite contact sockets of an electrical wiring on panels. Turn out screws (4) and disunite the socket (9). Turn out the screw (8) and remove the switch of management of functioning of a tempostat (S40). Turn out screws (5) and release assembly of the combined understeering switches (S4) from clamps (6) and remove it from a shaft of a steering column (7). Installation is made upside-down.