14.9.6. Removal and installation of electric motors of the drive of screen wipers
Details of installation of an electric motor of the drive of screenwashes
|
|
- Details of installation of an electric motor of the drive of screenwashes are shown on an illustration to which all references which are found in the text belong.
- Remove assembly of the drive of screen wipers (see the Head Kuzov).
- Release an axial nut (1) and turn out screws (3) fastenings to assembly of an electric motor (M6/1) of driving drafts (2).
- Disunite the contact socket of an electrical wiring (X88/2) and remove assembly of a driving electric motor (M6/1).
- Installation is made upside-down, - track correctness of installation of parking position of the drive, at a navorachivaniye of an axial nut (1) on a shaft of the motor track that the driving lever was lowered vertically down.
|
|
Screenwashes
Details of installation of an electric motor of the drive of a cleaner of back glass
|
|
- Details of installation of an electric motor of the drive of a cleaner of back glass are shown on an illustration to which all references which are found in the text belong.
- Bring the drive into parking situation.
- Remove an internal upholstery of a door of a back (see the Head Kuzov).
- Remove the lever of a screen wiper of back glass (see the Head Kuzov).
- Remove a stoplight of the top level (see the Section Removal and installation of the central stoplight of the top level).
- Disunite the contact socket of an electrical wiring (3).
- Disconnect a tube of supply of the washing liquid from the nipple socket (1).
- Turn out screws (2) fastenings of driving assembly to a back door.
- Remove driving an electric motor (M6/4).
- Installation is made upside-down, - in case of need replace the plug of a doorframe through passage.
|
|
