106fb49f

14.10.2. Removal and installation of block headlights, replacement of lamps

Details of installation of block headlights


 PERFORMANCE ORDER

  1. Details of installation of block headlights are shown on an illustration to which all references which are found in the text belong.
  2. Open a cowl.
  3. Having released a fixing agent (arrow A) under a lamp holder, uncover (1).
  4. Turn out screws (2) and give nuts (3).
  5. By means of a drift (4) release a support from a reception opening and remove a block headlight (E1 or E2), having pulled it forward.
  6. Disunite the contact socket of an electrical wiring (X24).
  7. Installation is made upside-down, - track reliability of a zashchelkivaniye of clamps and uniformity of an arrangement of a cover concerning a bumper.
  8. In conclusion check serviceability of functioning and correctness of adjustment of headlights.

Replacement of lamps

Details of installation of lamps of headlights

E1e1 — the Lamp of driving beam
E1e2 — the Lamp of passing beam
E1e4 — the Lamp of fog lighting

E1 — the Left block headlight
E2 — the Right block headlight


 PERFORMANCE ORDER

  1. The corresponding illustrative material is presented on an illustration to which all references which are found in the text belong.
  2. Open a cowl and record it in vertical position.
  3. Having wrung out the lever of a latch (3) in the direction specified by an arrow, release and uncover (1).
  4. Uncover (2).
  5. Disunite contact sockets of an electrical wiring (4) lamps.
  6. Having released the corresponding clamp (5), take the lamp needing replacement (E1e1, E1e2 or E1e4), - try not to touch flasks of lamps with naked fingers (it will be most correct to perform work in pure cotton gloves).
  7. Installation is made upside-down, - track reliability of fixing of a lamp in the boss.