13.1.10. Removal and installation of a front bumper
Details of installation of a front bumper on models standard (not AMG) complete sets
|
|
- Details of installation of a front bumper on models standard (not AMG) are shown to a complete set on an illustration to which all references which are found in the text belong.
- At the corresponding complete set remove elements of the lower protection of a motive compartment.
- Give nuts (1) and turn out bolts (1a) with left and with right the parties from within a bumper.
- Carefully, trying not to damage support, release clamps and remove a lattice of a front bumper.
- At the corresponding complete set remove the sensor of temperature of external air from a bumper.
- Give nuts (2) and, having given forward, remove a bumper, - try not to damage a paint and varnish covering.
- Installation is made upside-down.
|
|
AMG complete set models
Details of installation of a front bumper on AMG complete set models (including ML 55 AMG)
|
|
- Details of installation of a front bumper on models of a complete set of AMG are shown on an illustration to which all references which are found in the text belong.
- Release nuts (1) with right and with left the parties from within a bumper.
- Accurately remove the bumper lattice.
- Turn out screws (2) and, having given forward, carefully remove a bumper, disconnecting an electrical wiring of fog headlights / sensors of the Parktronic system and hoses of supply of the washing liquid.
- Installation is made upside-down.
|
|
