106fb49f

5.2.4. Removal and installation of the fan of the heater / conditioner of air and its resistive assembly

Details of installation of the fan of the heater/conditioner of air


 PERFORMANCE ORDER

  1. Details of installation of the fan of the heater/conditioner of air are shown on an illustration to which all references which are found in the text belong.
  2. Uncover under the dashboard (1) on the right.
  3. Turn out a bolt (2) fastenings of assembly of the fan with a driving electric motor (Sq.m).
  4. Disconnect an electrical wiring from a driving electric motor.
  5. Take ventilatory assembly from a casing (3).
  6. Installation is made upside-down.

Resistive assembly

Details of installation of resistive assembly of the fan of the heater/conditioner of air

1 — an air conditioner heater/evaporator Casing
2 — the Cover
3 — Bolts

4 — the Contact socket of an electrical wiring
R14 — Group of preliminary resistors of the fan


 PERFORMANCE ORDER

  1. Details of installation of a resistive sboka are shown on an illustration to which all references which are found in the text belong.
  2. Uncover under the dashboard (2) on the right.
  3. Disunite the contact socket of an electrical wiring (4) of resistive assembly (R14).
  4. Turn out fixing screws (1) and remove resistive assembly (R14).
  5. Installation is made upside-down.