13.2.13. Removal and installation of overlays of door thresholds
Details of installation of overlays of thresholds of side doors
|
|
- Details of installation of overlays of thresholds of side doors are shown on an illustration to which all references which are found in the text belong.
- Uncover with slips thresholds (1) (2).
|
|
On release models till 08.99 release clamps, moving from the center of a cover to its edges, on release models from 09.99 begin with the forward end of a cover and move back. |
- Turn out screws (3) fastenings of a slip to a door threshold.
- Remove caps (4) and turn out screws (3) fastenings of a slip to a rack of Century.
- On release models till 08.99 take a back pin of fastening of a slip (1).
- Having given forward, separate a slip (1) from a rack With and remove it from the car.
- Installation is made upside-down, - in case of need slightly unbend by means of a suitable wedge the finishing panel of a rack with the purpose of providing adequate space for landing of a slip (1).
|
|
Side doors
Details of installation of an overlay of a threshold of a door of a back
|
|
- Details of installation of an overlay of a threshold of a door of a back are shown on an illustration to which all references which are found in the text belong.
- Remove caps (1), - try not to scratch a slip, - and turn out the screws of fastening of a slip located under them (2).
- Remove a slip (2), - on the models equipped with the traveling computer, disunite the contact socket of an electrical wiring of an onboard compass.
- Installation is made upside-down, - track correctness of landing of a rubber sealant.
|
|
