13.2.6. Removal and installation of the lower and top main sections of the dashboard
Details of installation of the lower section of the dashboard (4)
|
|
- Details of installation of the lower section of the dashboard are shown on an illustration to which all references which are found in the text belong.
- Transfer the selector lever to situation "1" and prop up wheels protivotkatny boots.
- Disconnect a negative wire from the battery.
- Remove panels of facing of a steering column and assembly of the understeering switch (3).
- Turn out 1 (release models till 31.08.99)/3 (release models from 01.09.99) fixing a bolt (7).
- Turn out the left lower screws (5) of fastening of the lower section of the dashboard (4).
- Remove the central (console) section (11) of the dashboard (see the Section Removal and installation of the central (console) section of the dashboard).
- Remove the control panel of functioning of systems of heating/ventilation/air conditioning (10).
- Turn out fixing bolts (8 and 9).
- Remove a ware box (see the Sections Removal and installation of the main ware box and Removal, installation and adjustment of a cover of the main ware box (release model till 31.08.99)).
- Turn out the right lower screws (6) of fastening of the lower section of the dashboard (4).
- Release lamps of illumination of an entrance (17) from the dashboard and remove them, previously having disconnected an electrical wiring.
- Remove side facing panels (15) and turn out the bolts located under them (16).
- Release four clamps (A) in the central part of the lower section of the dashboard (4).
- Disconnect a driving cable (14) from the handle of an otpuskaniye of the parking brake (13).
- Remove the lower section (4) of the dashboard, - try not to damage a combination of devices.
- Installation is made upside-down, - track correctness of landing of the directing uvulas (In).
- In conclusion make cleaning of memory of the module of system of onboard self-diagnostics (see the Head Sistemy of electric equipment of the engine).
|
|
Top section
Details of installation of the top section of the dashboard
|
|
- Details of installation of the top section of the dashboard are shown on an illustration to which all references which are found in the text belong.
- Remove the lower section (10) of the dashboard (see above).
- Remove finishing panels of racks And (see the Section Removal and installation of panels of finishing of body racks).
- Having hooked a suitable wedge, remove the deflector (1) of an air duct of an obduv of a windshield, and also assembly of the central (7) and side (5) deflectors (see the Section Removal and installation of deflectors of air ducts of the dashboard).
- Turn out two top fixing screws (3).
- Disunite the contact socket (11) and remove assembly of a combination of devices (A1) (see the Head Onboard electric equipment).
- On release models from 01.09.99 disconnect an electrical wiring from the sensor of intensity of sunlight, - the contact socket is located under a combination of devices.
- At the corresponding complete set remove the Parktronic system display.
- On release models from 01.09.99 disconnect an electrical wiring from the servomotor of the drive of the distributive gate of systems of heating/ventilation/air conditioning, - the contact socket is located under assembly of the central deflectors at the left, and also from temperature sensor, - I will corrode under assembly of the central deflectors on the right.
- Turn out central (9) and side (4) fixing bolts and remove the top section (2) of the dashboard.
- Installation is made upside-down, - try not to damage a combination of devices.
|
|
