13.2.8. Removal, dismantling and installation of the central console
Details of installation of the central console
|
|
- The corresponding illustrative material is presented on an illustration to which all references which are found in the text belong.
- Remove the central armrest / cover of a console ware box (see the Section Removal and installation of a cover of a console ware box).
- Turn out forward screws (2) fastenings of a casing of the console (1).
- Disconnect an electrical wiring from switches of window regulators of back doors (S21/15s1 and S21/15s2), on release models till 31.08.01 release a plait from a basic arm.
- Disunite the contact socket of an electrical wiring on the floor panel under the console, on release models till 31.08.01 release a plait from a basic arm.
- Turn out back fixing screws (4) and remove a casing of the console (1) assembled with the lower section, having transferred for this purpose the AT selector lever to situation "N".
- Installation is made upside-down, - on release models from 01.09.01 make sure of reliability of fixing of an air duct.
|
|
Dismantling and assembly
Details of installation of components of the central console
|
|
- The corresponding illustrative material is presented on an illustration to which all references which are found in the text belong.
- Remove console assembly (see above) and transfer it to a workbench.
- Remove switches of management of functioning of window regulators of back doors ((2) is uncovered outside, switches - from within).
- Remove a back ashtray (3).
- Remove a chashkoderzhatel (4).
- Remove an internal element (6).
- Turn out six fixing screws and separate the top section / casing (7/1) of the console from lower (9).
- Installation of components is made as it should be, the return to an order of their dismantle.
|
|
