13.2.4. Removal and installation of the main ware box
Details of installation of the main ware box (model 163.136/154/172 with VIN on A145272, X708318)
|
|
- Details of installation of the main ware box of version 1 (model 163.136/154/172 on A145272, on X708318) are shown on an illustration to which all references which are found in the text belong.
- Open a box cover.
- Release a lamp of illumination of a box (E13/1) from clamps and disconnect it an electrical wiring.
- Remove the drummer of the lock (1).
- Turn out screws (2-7).
- Having hooked from below, release a box (10) from the dashboard.
- Installation is made upside-down, - check serviceability of functioning of the lock, in case of need make adjustment of a cover (see the Section Removal, installation and adjustment of a cover of the main ware box (release model till 31.08.99)).
|
|
Version 2
Details of installation of the main ware box (models 163.113/128/157/174/175 and 163.136/154/172 with VIN with A145273, X708319)
|
|
- Details of installation of a ware box of version 2 (models 163.113/128/157/174/175 and 163.136/154/172 with A145273, with X708319) are shown on an illustration to which all references which are found in the text belong.
- Open a cover (1).
- Release a lamp of illumination of a box (E13/1) from clamps and disconnect it an electrical wiring.
- Turn out screws (2).
- Remove the top rivets (5) of fastening of a ware box (3), - for removal of a rivet wring out a 4-millimeter pin up and give the clamp case down.
- Take a ware box (3) from the dashboard (4).
- Installation is made upside-down, - track correctness of combination of the upper edge of a cover (1) with a cut of the dashboard (4).
|
|
