13.2.5. Removal, installation and adjustment of a cover of the main ware box (release model till 31.08.99)
Details of installation of a cover of the main ware box
|
|
- Details of installation of a cover of the main ware box are shown on an illustration to which all references which are found in the text belong.
- Remove a ware box (see the Section Removal and installation of the main ware box).
- Slightly raise a cover (3) and release lock levers (1).
- Uncover (3).
- Installation is made upside-down.
|
|
Adjustment (model 163.136/154/172 with VIN on A145272, X708318)
Adjustment of a cover of a ware box (model 163.136/154/172 with VIN on A145272, X708318)
|
|
- The corresponding illustrative material is presented on an illustration to which all references which are found in the text belong.
- Release screws (3) fastenings of the drummer (4) and modify position of the last so that in a closed position the cover (1) slightly nestled on a buffer emphasis.
- In case of need се a box (see the Section Removal and installation of the main ware box) and, having released bolts (5), correct the provision of loops (6), trying to obtain a uniform gap of landing of a cover (1) in an aperture of the dashboard (2).
- Check freedom of the course of a cover and serviceability of a zashchelkivaniye of the lock.
- Establish into place a box (see the Section Removal and installation of the main ware box).
|
|
