- Estimate course size (by the number of clicks of a ratchet) and effort of resistance to squeezing of a pedal of the parking brake. Compare results of check to requirements of Specifications, in case of need make the corresponding adjustments.
- Remove back wheels.
- Carry out a preliminary tightness of the automatic regulator of a weak point (the compensation lever) of a cable.
- Rotating the screw-driver a castor of the regulator (105) from left to right, achieve, a prikhvatyvaniye of the reel of the mechanism of the parking brake, - the nave should not be turned manually.
|
|
Adjustment of the drive of the parking brake |
- Release a castor (105) exactly so (approximately on 5 teeth) that again the possibility of a provorachivaniye of a nave manually appeared.
|
|
Regulators of both brake mechanisms have to be released strictly on identical quantity of teeth! |
- Unload the automatic regulator of a weak point (the compensation lever) of a cable.
- Several times cock the parking brake, checking the size of the course of a pedal and effort of resistance to its squeezing. Estimate reliability of blocking of naves of back wheels the parking brake, check freedom of their rotation at a pedal otpuskaniye (the lever under the dashboard).
- Establish to the place of a wheel.
|
|
